Running A Jog Circuit By Using Push Button

What is a Jog Circuit?

In several applications, specified as motility keep, tool tooling, and matter direction, one moldiness be fit to slip the motor on for a few seconds to move the vexation slightly in the gardant or blow path. This type of travel restrain is titled jogging. The jogging racecourse utilizes a reverse causative official to reserve the motor to be emotional slightly when the ship or turnabout pushing secure is low.
Another requirement of the jogging racetrack is that the move starters don't bluejacket in when the push buttons are downhearted to change the loco mote when it's in the jog morality, yet operate as a rule travel starter when the motor controls are switched to the run style.

Explanation

Push pull button contains two normally open contacts that are also open.These buttons are also used for the jog control.When this is done,the run function is accomplished through relay.When the button is pressed to downward.The circuit is completed that changes all open contacts to close contacts and then the motor is connected to the power circuit.When the button is released the contact DE energize the m coil and disconnects the motor.

When the button is pulled in upward direction.The button completes the circuit to the CR relay and the other CR contact is connected in parallel with the jog section and energizes the M coil. As a result motor  is

connected to the power circuit until the stop button will be pressed.

Circuit Diagram